Dryers & Coolers
Pipe dryers work great for drying grain, sawdust or other materials in small granular form. The air temperature
on this unit is between 180 and 250 degrees F. This unit is used prior to pelletizing for material that is too wet.
SCHEMATIC FOR THE SINGLE BOILER DRYERS (see below)
Single Boiler Dryers
Single boiler dryers have one hot
air stove and are suitable for drying raw material with a moisture content of 20-25% or less. They can
reduce moisture up to 10-15% per pass.
Power: 5.4 HP.
Output Capacity: Up to 600 Lbs. Per Hour
x 3.3ft x 6.6ft
Weight: 1764 lbs
Output Capacity: Up to 1000 Lbs. Per Hour
Weight: 2,866 lbs
Dimensions: 49ft x 3.3ft x 6.6ft
Power: 15 HP.
Output Capacity: Up to 1500
Lbs. Per Hour
Weight: 4,189 lbs
Dimensions: 69ft x 5 ft x 10ft
Twin Boiler Dryer
Power: 10 HP.
Output Capacity: Up to 1,200
Lbs. Per Hour
Weight: 3,800 lbs
Dimensions: 33ft x 13ft x 11.5ft
The twin boiler has two hot air stoves. The twin boiler dryer has the capacity to reduce the moisture content between
25-40% with only one pass through the dryer.
SCHEMATIC FOR THE PPD1100
TWIN BOILER DRYER (see below)
A counter flow cooler is a great way to cool and air dry pellets after pelletizing. The counter flow method gives you
even cooling and drying every time.
Power: 2.5 HP. 3/Phase
Output Capacity: Up to 2-3 Tons
Weight: 2,360 lbs
NOTE: The items on this page are considered "Special Order"
as we do not carry them in stock. A 50% deposit is required for ordering with an approx. 45
day lead time.