Pellet Pros

Home | Small Pellet Mills | Large Pellet Mills | Diesel and PTO Mills | Demo Equipment For Sale | Hammer Mills | Dryers & Coolers | Bagger | Moisture Meters | Shipping-Payment-Policy | Contact Us | Map/Directions | Testing Results | Videos | Pictures | FAQ | Dealers

Portable Mill

Pellet Pros Model PP850D Pellet Mill.

DSCN1350.jpg

Power: 30HP Diesel, 2 Cylinder Self Contained / Radiator with Fan / Electric Start

Weight: 1,350 lbs.

Production Capacity: Up to 1,000 Lbs. Per Hour

Dimensions: 72"long X 30" wide X 59" high with the muffler and 38" high without the muffler

Fuel Usage: Approximately 1 US gallon Per Hour

Material Use: All Biomass Products

Price: $9,900.00 (USD)

Replacement die and roller set for the PP850D: $995.00 (USD)

 

Pellet Pros Model  PP650D-2

PA190106PP650D-2.jpg

Power: 15HP Diesel / Liquid cooled /Electric start/Clutch
Weight: 700 Lbs.
Production Capacity:  Up to 350-650 Lbs. Per Hour
Dimensions: 32"x30 1/2"x55"
Fuel Usage: 1 US. Quart/Hour approx.
Material Use:All Biomass Products
Price: $4,500.00 (USD)
Replacement Die and Roller Set for PP650D-2: $389.00 (USD)

Pellet Pros Model  PP-PTO

PPPTO1.jpg

PTO SPEED:  540 RPM 6 Spline 1 3/8" Shaft
Production Capacity: Up to 150-250 Lbs. Per Hour
Price: $4,300.00 (USD)

WEIGHT:  356 lbs

Material Use: All biomass products 

The PTO requires a minimum of 25HP to operate.

Replacement Die and Rollers for the PTO: $389.00 (USD)

      

  Either of these mills are a great choice. You can use them where you need to work and not have to worry about having power available on site. Both units work well with all biomass material.

  Pellet Pros Model     PP650D-W 

DSCN1479PP650DW.jpg

Power: 15 HP diesel/ electric start/ water cooled

Weight: 750 Lbs.

Production Capacity: Up to 200-300 Lbs per hour(extremely hard wood lowers production rates)

Fuel consumption: 1 US Quart per hour (approx)

Material use: wood products only

Price: $4,995.00 (USD)

 

Replacement Die and Roller Set for PP650W: $389.00 (USD)

  The PP650D-W is a wood products machine. Through gear reduction, the mill has been slowed down to give it more power and torque and the ability to make a shiny, heavy commercial pellet. Production numbers are about half of the original 650D, but the quality of the pellets are very good. This model is also available in a 10 HP electric model (PP600-W).


  PP650-2,PP-PTO and PP650W Replacement Die and Roller  Set $389.00


Pellet Pros, Inc. 4004 W. Kimberly Rd. Davenport, IA 52806

 



This site  The Web

Web site hosting by Web.com